06-5. 部署 kube-proxy 组件

kube-proxy 运行在所有 worker 节点上,它监听 apiserver 中 service 和 endpoint 的变化情况,创建路由规则以提供服务 IP 和负载均衡功能。

本文档讲解部署 ipvs 模式的 kube-proxy 过程。

注意:如果没有特殊指明,本文档的所有操作均在 zhangjun-k8s-01 节点上执行,然后远程分发文件和执行命令。

下载和分发 kube-proxy 二进制文件

参考 05-1.部署master节点.md

创建 kube-proxy 证书

创建证书签名请求:

cd /opt/k8s/work
cat > kube-proxy-csr.json <<EOF
{
  "CN": "system:kube-proxy",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "opsnull"
    }
  ]
}
EOF
  • CN:指定该证书的 User 为 system:kube-proxy
  • 预定义的 RoleBinding system:node-proxier 将User system:kube-proxy 与 Role system:node-proxier 绑定,该 Role 授予了调用 kube-apiserver Proxy 相关 API 的权限;
  • 该证书只会被 kube-proxy 当做 client 证书使用,所以 hosts 字段为空;

生成证书和私钥:

cd /opt/k8s/work
cfssl gencert -ca=/opt/k8s/work/ca.pem \
  -ca-key=/opt/k8s/work/ca-key.pem \
  -config=/opt/k8s/work/ca-config.json \
  -profile=kubernetes  kube-proxy-csr.json | cfssljson -bare kube-proxy
ls kube-proxy*

创建和分发 kubeconfig 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/k8s/work/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-credentials kube-proxy \
  --client-certificate=kube-proxy.pem \
  --client-key=kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

分发 kubeconfig 文件:

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_name in ${NODE_NAMES[@]}
  do
    echo ">>> ${node_name}"
    scp kube-proxy.kubeconfig root@${node_name}:/etc/kubernetes/
  done

创建 kube-proxy 配置文件

从 v1.10 开始,kube-proxy 部分参数可以配置文件中配置。可以使用 --write-config-to 选项生成该配置文件,或者参考 源代码的注释

创建 kube-proxy config 文件模板:

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > kube-proxy-config.yaml.template <<EOF
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
clientConnection:
  burst: 200
  kubeconfig: "/etc/kubernetes/kube-proxy.kubeconfig"
  qps: 100
bindAddress: ##NODE_IP##
healthzBindAddress: ##NODE_IP##:10256
metricsBindAddress: ##NODE_IP##:10249
enableProfiling: true
clusterCIDR: ${CLUSTER_CIDR}
hostnameOverride: ##NODE_NAME##
mode: "ipvs"
portRange: ""
iptables:
  masqueradeAll: false
ipvs:
  scheduler: rr
  excludeCIDRs: []
EOF
  • bindAddress: 监听地址;
  • clientConnection.kubeconfig: 连接 apiserver 的 kubeconfig 文件;
  • clusterCIDR: kube-proxy 根据 --cluster-cidr 判断集群内部和外部流量,指定 --cluster-cidr--masquerade-all 选项后 kube-proxy 才会对访问 Service IP 的请求做 SNAT;
  • hostnameOverride: 参数值必须与 kubelet 的值一致,否则 kube-proxy 启动后会找不到该 Node,从而不会创建任何 ipvs 规则;
  • mode: 使用 ipvs 模式;

为各节点创建和分发 kube-proxy 配置文件:

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for (( i=0; i < 3; i++ ))
  do 
    echo ">>> ${NODE_NAMES[i]}"
    sed -e "s/##NODE_NAME##/${NODE_NAMES[i]}/" -e "s/##NODE_IP##/${NODE_IPS[i]}/" kube-proxy-config.yaml.template > kube-proxy-config-${NODE_NAMES[i]}.yaml.template
    scp kube-proxy-config-${NODE_NAMES[i]}.yaml.template root@${NODE_NAMES[i]}:/etc/kubernetes/kube-proxy-config.yaml
  done

创建和分发 kube-proxy systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > kube-proxy.service <<EOF
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
WorkingDirectory=${K8S_DIR}/kube-proxy
ExecStart=/opt/k8s/bin/kube-proxy \\
  --config=/etc/kubernetes/kube-proxy-config.yaml \\
  --logtostderr=true \\
  --v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

分发 kube-proxy systemd unit 文件:

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_name in ${NODE_NAMES[@]}
  do 
    echo ">>> ${node_name}"
    scp kube-proxy.service root@${node_name}:/etc/systemd/system/
  done

启动 kube-proxy 服务

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${K8S_DIR}/kube-proxy"
    ssh root@${node_ip} "modprobe ip_vs_rr"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable kube-proxy && systemctl restart kube-proxy"
  done

检查启动结果

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status kube-proxy|grep Active"
  done

确保状态为 active (running),否则查看日志,确认原因:

journalctl -u kube-proxy

查看监听端口

$ sudo netstat -lnpt|grep kube-prox
tcp        0      0 172.27.138.251:10256    0.0.0.0:*               LISTEN      30590/kube-proxy
tcp        0      0 172.27.138.251:10249    0.0.0.0:*               LISTEN      30590/kube-proxy
  • 10249:http prometheus metrics port;
  • 10256:http healthz port;

查看 ipvs 路由规则

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "/usr/sbin/ipvsadm -ln"
  done

预期输出:

>>> 172.27.138.251
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.254.0.1:443 rr
  -> 172.27.137.229:6443          Masq    1      0          0         
  -> 172.27.138.239:6443          Masq    1      0          0         
  -> 172.27.138.251:6443          Masq    1      0          0         
>>> 172.27.137.229
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.254.0.1:443 rr
  -> 172.27.137.229:6443          Masq    1      0          0         
  -> 172.27.138.239:6443          Masq    1      0          0         
  -> 172.27.138.251:6443          Masq    1      0          0         
>>> 172.27.138.239
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.254.0.1:443 rr
  -> 172.27.137.229:6443          Masq    1      0          0         
  -> 172.27.138.239:6443          Masq    1      0          0         
  -> 172.27.138.251:6443          Masq    1      0          0

可见所有通过 https 访问 K8S SVC kubernetes 的请求都转发到 kube-apiserver 节点的 6443 端口;

zhangjun            最后更新: 2020-02-07 09:34:20

results matching ""

    No results matching ""